Project: GrandAmp, Hardware
| Hardware Inventory (General/Audio) |
| Manufacturer |
Part Number |
Description |
| Pontiac |
1999 Grand Am SE Coupe |
The Car |
| Car Alarm |
N/A |
Right, Like I would get into specifics... ;) |
| Directed |
Model 250 |
150 Watt 2 channel amplifier |
| Directed |
Model 200 |
250 Watt 4 channel amplifier |
| Coustic |
XM6 |
2-, 4- or 6-Channel, 2- or 3-Way Crossover |
| Directed |
Viper 12.2 |
2 12" Viper Subwoofers |
| Infinity |
6953i |
2 6"x9" three-way auto speakers |
| Infinity |
4652cfp |
2 4"x6" two-way plate auto speakers |
| Stinger |
SC201W |
White 1 farad Capacitor |
| Jacobs Electronics |
Accuvolt FR-750 |
Voltage Regulator |
| Optima |
"Yellow Top" |
A deep cycle, sealed,battery |
| PAC |
PAC-200 |
200 Amp Relay for battery isolation |
| Monster & Lightning Audio Interconnects |
Misc |
Audio and Power Interconnects |
 |
N/A
|
While I was in Northern Virginia I had some significant power issues. I bought my Stinger Cap from these guys. The same week, my stock alternator failed. They helped me to find a new one! If your in the region, call 'em up! |
 |
N/A
|
This is the local Car audio shop. I have bought quite a few pieces of equipment from these guys. A lot of knowlege, skills, and abilities. Very professional. I recommend doing business with them! |
| R & R Rebuilders |
N/A
|
A local shop that increased the output of my alternator from 105 Amps to 160 Amps! No warranty, and the cost was ~$170.00. |
|
| |
| Hardware Inventory (GrandAmp v2.0) |
|
| Manufacturer |
Part Number |
Description |
| Myself |
Startup/Shutdown relay circuit |
Startup/Shutdown relay circuits connected to the power header to generate ACPI events. (Just a new PCB I etched, but fully based on Mikey's controller) |
| Myself |
Case |
Vehicle mountable, [Micro/Mini]-[ATX/ITX], fully aluminum case |
| Myself |
AirTux 2.4Ghz |
A 2.4GHz Vertical Collinear Omnidirectional Antenna |
| PC Power & Cooling |
12v Power Supply |
Sleekline Power Supply (Don't let it get too hot!) |
| PCChips |
M758LMR+ |
Motherboard that is LinuxBios capable with 6 channel audio out, with a 1.1 Ghz Celeron, and 1/2 Gig Ram |
| Earth LCD |
MTR-EVUE-12.1 |
Backlit 16.7M Color TFT Analog Monitor |
| 3M Touch Systems |
14-206 |
USB Uncased Capacitive Touchscreen Controller |
| 3M Touch Systems |
7312256 |
USB Cable for 14-206/44-206 |
| Western Digital |
WD1000BB |
100Gb Hard Drive |
| Adaptec |
AUA-3121 |
DuoConnect combo Firewire and USB2 card |
| KWorld |
KW-TV878RF |
TV Tuner, Video Capture Card |
| Griffin Technology |
Powermate |
Volume Knob with an LED lit base which pulses, dims, and brightens based on user input |
| Holux |
GM-200 USB |
USB GPS Recever |
| Linksys |
WUSB11 v2.5 |
802.11b USB Wireless Adapter |
| B. Roadman |
BR1 OBDII to Serial interface |
Slightly modified OBDII to serial controller using relays to connect/dis-connect due to freaky ISO protocol |
|
| |
| Hardware Inventory (GrandAmp v1.0) |
|
| Manufacturer |
Part Number |
Description |
| Built by Michael Carr! |
Startup/Shutdown relay circuits |
Startup/Shutdown relay circuits connected to the power header to generate ACPI events. |
| Biostar |
M5SAF |
Sunflower "Barebones" System |
| Earth LCD |
MTR-EVUE-12.1 |
Backlit 16.7M Color TFT Analog Monitor |
| 3M Touch Systems |
14-206 |
USB Uncased Capacitive Touchscreen Controller |
| 3M Touch Systems |
7312256 |
USB Cable for 14-206/44-206 |
| Western Digital |
WD1000BB |
100Gb Hard Drive |
| Iomega |
Z100USBS |
Iomega Zip100 powered by USB bus |
| D-Link |
DSB-R100 |
PC FM USB Radio |
| Holux |
GM-200 USB |
USB GPS Recever |
| Linksys |
WUSB11 v2.5 |
802.11b USB Wireless Adapter |
|
|
|
